Floor Plans for Interior Design Firms
Existing conditions, captured to the millimeter — not the tape measure.
LiDAR floor plans, as-built CAD drawings, and 360° walkthroughs built from a single site scan — so your design team starts from accurate reality, not a rough sketch. Florida statewide, FAA-107 Pilot licensed, turnaround in days.
Three deliverables, one site visit
Everything your design team needs to start work confidently — pulled from a single LiDAR scan and verified on-site.
LiDAR Floor Plans
Full-property 360° LiDAR capture with the iGUIDE R1 and SHARE S-20 3D LiDAR scanner, registered into precise, to-scale floor plans ready for space planning and renovation layouts.
- Sub-inch dimensional accuracy
- Delivered as PDF, DXF, and interactive walkthrough
- GNSS-RTK ground control on larger properties
As-Built CAD Drawings
Point cloud data traced into precise CAD line work and verified with the Leica DISTO X6 precision laser measurement instrument, producing clean, permit-ready CAD files that match the space as it actually exists.
- DWG and DXF formats
- Wall, door, window & fixture placement
- Millimeter-verified critical dimensions
360° Virtual Walkthroughs
Immersive walkthroughs captured with the iGUIDE 360 LiDAR precision scanner & image capture system and SHARE S-20 3D LiDAR scanner imagery — ready to drop straight into client presentations, proposals, and mood boards, not just for site reference.
- Shareable link, no app required
- Paired room-by-room with the floor plan
- Ideal for pitch decks & proposals
Built for the way design teams actually work
Existing-conditions documentation is the foundation everything else gets built on. Get it wrong and the cost shows up later — in change orders, revised drawings, and client friction.
-
1
Skip the change-order spiral
Accurate as-builts catch conflicts before they hit the construction phase.
-
2
Pitch with a walkthrough, not a floor plan alone
Clients respond to space they can move through, not lines on paper.
-
3
Scan data doubles as client-ready visuals
The same capture that produces your CAD files also gives you high-resolution imagery and walkthroughs for proposals, mood boards, and presentation decks — no separate photo shoot needed.
-
4
One site visit, every file format you need
CAD for your drafters, PDF for the client, a link for the pitch deck.
-
5
Verified, not estimated
Every deliverable is checked against on-site laser measurements before it ships.
From site visit to file delivery in three steps
A typical residential or commercial interior scan takes under two hours on site.
Scan the space
On-site LiDAR and laser capture with the iGUIDE R1, SHARE S-20 3D LiDAR scanner, and Leica DISTO X6 precision laser measurement instrument — every room, corridor, and elevation.
Process the point cloud
Data is registered in SHARE Studio and traced into CAD, with dimensions cross-checked against laser measurements.
Deliver your files
Floor plans, CAD drawings, and walkthrough links land in your inbox — typically within days, not weeks.
Deliverables built for how your team files them
File formats included
Formats compatible with the CAD and design software your studio already runs.
Every scan includes
- To-scale room dimensions
- Door, window & fixture locations
- Ceiling height notations
- Shareable client walkthrough link
Explore a live 360° scan
Move through an actual iGUIDE capture the way your clients would — pan, zoom, and jump between rooms.
The interactive scan couldn't load. Open it in a new tab instead.
Based in South Florida, scanning statewide and the USA
Residential remodels, commercial buildouts, and multi-unit projects — scheduled around your project timeline, with rush turnaround available for pitch deadlines.
- South Florida — same-week scheduling
- Statewide Florida coverage for multi-site portfolios
- Licensed, insured, FAA Part 107 compliant
Request a site scan
Reach out directly and we'll follow up with availability and a quote — usually within one business day.
- Typical turnaround: 3–5 business days
- Rush scheduling available for pitch deadlines
- No obligation, no cost site quote
Frequently asked by design teams
How accurate are the floor plans compared to a tape measure?
LiDAR capture with RTK ground control produces sub-inch accuracy across the full property — well beyond hand-measured or estimated floor plans, and consistent enough to use directly in permit submissions.
What CAD formats do you deliver?
DWG and DXF are standard, alongside a to-scale PDF and a shareable 360° walkthrough link. Let us know if your studio needs a specific format or layer standard.
How long does an on-site scan take?
Most residential and single-suite commercial spaces take under two hours on site. Larger commercial or multi-unit properties are scoped and quoted individually.
Do you work with firms outside South Florida?
Yes — we're based in South Florida and scan statewide, including multi-site portfolios for firms with projects across several markets.